Intuitive standalone digital G-meter with built-in Flight recorder!
Standalone G-meter indicates and logs g-forces with an integrated high precision digital pressure sensor and inertial platform. The unit has standard dimension of 57 mm diameter.
3 Push Buttons used for a simplified handling during the flight or ground operations and Micro SD card for data exchange (SW update and Flight downloads).
LIMITS – Inertial platform with +-8g accelerometer. Device is showing current g-load in navbox/needle and it’s min-max values in bar. Last flight min/max load navboxes are persistent till next flight. Min/Max limits with Warning zones can be defined.
LOGBOOK – The logbook menu displays the list of flights. If the RTC time is set properly the take-off and landing time shown will be correct. Each flight item consists of the maximum positive g-load, the maximum negative g-load from the flight and the maximum IAS. This function is available only with “FR” version.
Specification
- Depth: 48 mm
- Weight: ~200 g
- ARM Cortex-M4 160MHz
- High resolution airspeed sensor
- Inertial platform 3 axis accelerometer (+-8g) and 3 axis gyroscope
- Serial port input/output on RS232 level (standard IGC 6 pin connector RJ11)
- Micro SD card
- 3 x Push buttons
- 2 GBytes of internal memory
- Integrated SD card reader
- 12V (power input 8-32V) – 90 mA – 140 mA
- Material: Aluminum housing
Display
- 2.5-inch sunlight readable
- 16 bit color display
- 1200 cd brightness
- 320-pixel-by-240-pixel resolution
- ALS – ambient light sensor
Flight Recorder
- Built-in RTC (Real time clock)
- Unlimited storage for flights (+28000 hours at 1 sec interval)
- Flights stored in IGC file format are downloadable on SD card.
Important: This is a non-certified instrument!
