The KRT2-S VHF-AM transceiver has a full graphic LC-display that allows for easy reading under all light conditions, including full sun. The display illumination can be dimmed or turned off. The KRT2 is designed for 8.33 kHz and 25kHz channel spacing that will become the new international standard for airborne communication. Switching between the 8.33 and the 25 kHz mode is effortlessly simple. Standard or dynamic microphones can be used. A built-in-test facility increases flight safety. The dual watch mode that allows scanning of two different channels is included. The KRT2, with its integrated VOX/Intercom circuit, allows communication between pilot and co-pilot.

• 8.33 kHz, integrated VOX/Intercom, dual watch mode
• Complete VHF transceiver in a 2 ¼ inch (57mm) housing, only 144mm depth.
• Satisfies upcoming equipage requirement for 8.33kHz channel spacing.
• Dual-watch technology, simultaneous monitoring of two frequencies.
• Voice controlled intercom, can be deactivated for use with external intercom.
• Memory for up to 100 user-definable named frequencies.
• Remote control unit available
• Certification: EASA.210.10038036

Main Features

• Frequency Range: 118.000 MHz to 136.990 MHz
• Channel Selection: 8.33 or 25 kHz (select automatically)
• RF-Output Power: > 6 W (carrier power)
• Receiver Sensitivity: > 12 dB SINAD @ 2 uV
• Input Voltage Range: 9 V DC to 36 V DC
• Operating Temperature Range: -20°C to +55°C, for short time up to +70°C
• Current consumption: 1,6 A @12 V DC (transmit), 110mA@12 V DC (receive standby)
• Certification: ETSO-2C169a, ED-23B Class 4, C, TSO-C169a,Class 6, H1 & H2
• Function: dual watch mode, integrated VOX / Intercom
• Weight / dimensions: 360g / 57mm mit 62h x 63b mm

We do not recommend adapters for connecting, since it could lead to power loss !!! With the simple "solder plug kit" saves you money and there are only 8 pins to solder, a simple and clean solution!

KRT2-S and KTX2-S as a good combination for any aircraft!